International Conference on Gears 2019
The 8th International Conference on Gears 2019 will be held in Garching, Germany, at the Technical University of Munich’s Gear Research Centre (FZG) from September 18th to 20th, 2019. The conference brings together over 600 leading experts from the international gear and transmission industry and is supported by national and international associations. Presenting a paper gives you the opportunity to take part in this leading international forum and learn about the latest developments and research results in the powertrain industry and academia.
Call for papers is open - We’re looking for experts.
Submit your entry by the 08. November 2018.
Submit your abstract and join the discussion
We would like to invite and encourage you to submit an abstract and contribute to the discussion about improvements in the field of gears and transmissions, how gears can contribute to increasing energy efficiency, reducing resource consumption and how new technologies will be incorporated in the powertrain.
Don’t miss out on this unique opportunity to meet equipment manufacturers, producers and researchers in the areas of gear and transmission systems and present your new solutions, latest research results and technical ideas.
Examples of topics covered:
- Design, analysis and simulation of gears and transmissions
- Industrial applications, such as transmissions for energy systems or for mobility systems, etc.
- Testing, such as new test methods and/or procedures for lifetime, efficiency and noise behavior
- Materials, lubricants and tribology
- Manufacturing, such as productivity increases with new concepts for machine and manufacturing processes, machine running times or throughput times – balancing of productivity and flexibility
- Gear Manufacturing in the context of digitalization and industry 4.0
- The possibilities and potential for plastic gears
For a full list of conference topics, please download the call for papers.
Be part of the most important international conference in the field of gears and transmissions in 2019 and meet your colleagues, peers and experts to share ideas and learn together.
Submit your abstract now.The deadline for abstract submission is November 2nd, 2018
Download the call for papers.
Guidelines for preparing your abstract
Authors should take note of the following requirements:
- Title of the paper and/or poster
- An abstract summarizing your paper, no more than one sheet of A4
- Information about the speaker and co-authors: name, title(s), company address, department, affiliation, e-mail, telephone and fax numbers
- The topic area(s) where your presentation should be listed
- A statement specifying what is new in your presentation
- A bibliography of your previous publications about this subject
- How you would like to present your paper upon acceptance (full or poster presentation)
- Note whether a peer review of the complete manuscript is requested
- Abstracts should be submitted in PDF or Word format
- The official language is English
To submit your abstract, you will need to create an account or log in at www.vdi-com.de. This allows you to submit and manage abstracts, papers, and posters associated with the International Conference on Gears 2019.
If you have any questions or need further information please contact Mrs. Koerber.
Important dates for authors
We would like to remind all authors of the important dates below:
Deadline for submission of abstracts | November 2nd, 2018 |
Notification of acceptance | End of February 2019 |
Deadline for submission of manuscripts | June 7th, 2019 |
Deadline for submission of manuscripts for peer review and | March 29th, 2019 |
The program committee will decide which papers are accepted and the order of presentation in the conference program on the basis of the abstract. All accepted authors are required to submit a full paper to be published in the conference proceedings, which have an official ISBN number. If accepted authors would like their full paper to be peer reviewed, this must be indicated in the abstract. The paper will be reviewed and – if accepted – published in the magazine “Forschung im Ingenieurwesen”. This journal is currently listed in Scopus and Web of Science, with a recognized impact factor of 0.667 (Journal Citation Reports®, Thomas Reuters 2017).
Program
We are currently preparing the final program for you. You will soon be able to download it here.
Accompanying conferences focus on high-performance plastic gears and gear production
In addition to the International Conference on Gears 2019, further accompanying conferences offer detailed insight into all aspects of
>> Gear Production 2019
>> High Performance Plastic Gears 2019
Experts in the fields of gear manufacturing or plastic gears are invited to contribute a proposal to the International Conference on Gears 2019 call for papers.
Entrance to the accompanying conferences is free for registered participants of the International Conference on Gears 2019.
Two social events offer excellent networking opportunities
The conference offers many opportunities to meet up with colleagues - old and new - during the breaks. A social evening in the main hall of the university will be held on the second conference day. Furthermore, we warmly invite you to a special, surprise external evening event. Attendance at the social events is included in the conference fee.
Sponsorship & exhibition opportunities
The International Conference on Gears 2019 – the world’s leading congress in the field of gears and transmissions – offers you the chance to reach out to key players in the industry. Speak directly to your targeted audience and interact with high-profile delegates through sponsorship and exhibition opportunities. If you are interested in presenting your products and services please contact us.
Secure your participation – register for the International Conference on Gears 2019
Submit your abstract now or book your space at our next convention now to make sure you will be part of the leading international platform for equipment manufacturers and producers and also researchers into gear and transmission systems.
Amir Aboutaleb American Gear Manufacturers Association / Alexandria
Univ.-Prof. Dr.-Ing. Dr. h.c. Albert Albers Karlsruher Institut für Technologie (KIT) IPEK-Institut für Produktentwicklung / Karlsruhe
Prof. Dr.-Ing. Kyrill Arnaudow Institute of Mechanics and Biomechanics Bulgarien Academy of Science / Sofia
Dr.-Ing. Heinz-Uwe Arnscheidt Volkswagen Aktiengesellschaft / Wolfsburg
Dr.-Ing. Jörg Börner ZF Friedrichshafen AG / Friedrichshafen
Johan Bos Schelde Gears B.V. / Vlissingen
Dr.-Ing. Bernhard Bouché Getriebebau Nord GmbH & Co KG / Bargteheide
Prof. Dr.-Ing. Christian Brecher RWTH Aachen / Aachen
Prof. Bingkui Chen Chongqing University / Shapingba,Chongqing
Dr.-Ing. Rolf Döbereiner MAGNA Powertrain GmbH / Lannach
Prof. Emeritus Dr. Eng. Adam Döbröczöni University of Miskolc / Miskolc
Prof. Dr. Joze Duhovnik Faculty of Mechanical Engineering University of Ljubljana / Ljubljana
Dr.-Ing. Hartmut Faust LuK GmbH & Co KG / Bühl
Dr.-Ing. Carsten Gitt Daimler AG / Stuttgart
Prof. Dr. Sc. Veniamin Goldfarb Staatliche Technische Universität Izhevsk / Izhevsk
Prof. Ing. Carlo Gorla Politecnico di Milano Dipartimento di Meccanica / Milano
Dr. Arbogast Grunau Schaeffler Technologies AG & Co. KG / Herzogenaurach
Dipl.-Ing. Norbert Haefke FVA GmbH / Frankfurt
Dr.-Ing. Jörg Hermes SEW-EURODRIVE GmbH & Co KG / Bruchsal
Dr.-Ing. Ralf Hess Flender GmbH / Bocholt
Prof. Dr.-Ing. Manfred Hirt FZG-Augsburg Außenstelle der Forschungsstelle für Zahnräder und Getriebebau - TU München / Augsburg
Prof. Dr.-Ing. Bernd-Robert Höhn FZG Forschungsstelle für Zahnräder und Getriebebau Technische Universität München / Garching
Prof. Dr.-Ing. Haruo Houjoh Tokyo Institute of Technology / Yokohama-city
Prof. Dr. em. Donald Houser The Ohio State University / Columbus, OH
Prof. Dr.-Ing. Georg Jacobs MSE – Institut für Maschinenelemente und Systemententwicklung RWTH Aachen / Aachen
Prof. Dr. Ahmet Kahraman The Ohio State University / Columbus, OH
Dr. Ulrich Knödel GETRAG B.V. & Co. KG / Untergruppenbach
Caroline Körber VDI Wissensforum GmbH / Düsseldorf
Prof. hc. Dr.-Ing. Aizoh Kubo Kyoto University / Sakyou-ku, Kyoto
Dipl.-Ing. Dirk-Olaf Leimann ZF Wind Power Antwerpen NV / Lommel
Prof. em. Dr.-Ing.habil. Heinz Linke Technische Universität Dresden / Dresden
Prof. Geng Liu Northwestern Polytechnical University / Xi'an Shaanxi
Prof. Dr.-Ing. Athanassios Mihailidis Aristotle University / Thessaloniki
Prof. Dr.-Ing. Vojislav Miltenovic Mechanical Engineering Faculty University of Nis / Nis
Prof. Dr.-Ing. Ichiro Moriwaki Kyoto Institute of Technology / Sakyo-ku, Kyoto
Dr.-Ing. Harald Naunheimer ZF Friedrichshafen AG / Friedrichshafen
Dr. Michel Octrue CETIM Centre Technique des Industries Mécaniques / Senlis Cedex
Robin Olson Rexnord Corporation / Milwaukee
Prof. Dr. Ing. Jose Pedrero Universidad Nacional de Educacion / Madrid
Dr.-Ing. Burkhard Pinnekamp Renk AG / Augsburg
Prof. Gerhard Poll Leibniz Universität Hannover / Hannover
Prof. Dr. Ing. Datong Qin Chongqing University / Shapingba,Chongqing
Dipl.-Ing. Zsolt Roth Voith Turbo GmbH & Co. KG / Heidenheim
Prof. Dr.-Ing. Bernd Sauer TU Kaiserslautern Fachbereich Maschinenbau und Verfahrenstechnik / Kaiserslautern
Prof. Dr.-Ing. Berthold Schlecht Technische Universität Dresden / Dresden
Dipl.-Ing. Michael Schöffmann Audi AG / Ingolstadt
Prof. Dr. Alfred J. H. Schoo Westfälische Hochschule Gelsenkirchen Bocholt Recklinghausen / Bocholt
Prof. Ray Snidle Cardiff School of Engineering Cardiff University / Cardiff
Prof. Dr.-Ing. Karsten Stahl FZG Forschungsstelle für Zahnräder und Getriebebau Technische Universität München / Garching
Prof. Dr.-Ing. Peter Tenberge Fakultät für Maschinenbau Ruhr-Universität-Bochum / Bochum
Dr.-Ing. Joachim Thomas ZG Hypoid GmbH / Eching
Prof. Dr. Ing. Philippe Velex INSA - Institut National des Sciences Appliquees de Lyon / Villeurbanne Cédex
Dr.-Ing. Reiner Vonderschmidt GEORGII KOBOLD GmbH & Co. KG / Horb
Prof. Michael Weigand Technische Universität Wien Institut für Konstruktionswissenschaften und Technische Logistik E307 / Wien
Dr.-Ing. Toni Weiss GanaCon Gear analysis and consulting / Inning
Dr.-Ing. Ralf Wittor Eickhoff Maschinenfabrik GmbH / Bochum
Other hotel partners: 
Call for Papers
The closing date for submitting is 08. November 2018
International Conference on Gears 2017
Gear Research Centre (FZG)
Institute of Machine Elements
Technical University of Munich
Boltzmannstr. 15
85748 Garching
Germany
You can reach us at:
+49(0)2116214-201
+49(0)2116214-154
wissensforum@vdi.de
Become an exhibitor or sponsor
Are you missing something?
Do you need more information about this event? Then please feel free to send us a message.
Write a message