Conference

International Conference on High Performance Plastic Gears

  • Be part of this unique platform for the international community of High Performance Plastic Gears experts.
  • Meet leaders and listen to newest developments in the field of plastic gears.
  • Three parallel running conferences on Gears, Plastic Gears and Gear Production – and you just pay for one and can visit all three.
  • Present your company, your products and services to a well targeted audience – book an exhibition stand.
High Performance Plastic Gears | VDI Conference

During our 3rd international Conference on High Performance Plastic Gears experts will talk about the potentials of plastic gears and in which cases they are a better choice than metal gears to transfer power and torque. Experts and professionals provide answers regarding their current state of the art, application and experiences with high performance plastic gears and give an outlook on what the future holds in store for us. In addition, two exclusive evening events invite to network and exchange knowledge. The conference is an accompanying event to the “International Conference on Gears 2019”.

Advances in polymers have created plastic gear solutions

The design flexibility, reduced noise, ability to operate without lubrication and corrosion-resistance are only some of the economic advantages of plastic gears. Nevertheless it is important to be familiar with the limitations of plastic gears relative to metal gears. Design and User Experience are key issues in the Industry, which faces many challenges, producing plastic gears with features required by the customer, ensuring that the performance stays as good as using metal gears. 

Listen during our international conference to topics such as:

  • Potentials for NVH improvements using plastic gears
  • Novel tooth geometry and applications in various industries
  • High-performance polymers for gears
  • Analysis of thermo-elastohydrodynamic (TEHL) contacts of thermoplastic gears
  • Methods for simulation and calculation of plastic gears

One ticket, three conferences, three days excellent knowledge transfer

Our International Conference on High Performance Plastic Gears, the International Conference on Gears and the International Conference on Gear Production take place simultaneously. With your ticket of the International Conference on High Performance Plastic Gears you can listen to all presentations of all three conferences with a total of five tracks.

Network with your peers at two social evening event

All participants visit two exclusive evening events together. The evening receptions offer a good opportunity to meet and greet old and new business partners from the industry and science. Join us and experience unforgettable evenings in Munich.

Exhibition Area: More Networking & Marketing Opportunities

Meet with professionals in the field of gears and transmission from all over Europe and beyond in our exhibition area. Throughout the three days, companies present their innovative solutions and you will be able to visit the national and international exhibitors and make new partnerships, and more. Should your organisation be interested or would like to receive more information, please do not hesitate to contact Christoph Brockerhoff.

On-site lab tours offer live experience in gear technology

Seize the opportunity and visit the nearby test and laboratory facilities at the Gear Research Centre (FZG). Several guided tours with different core topics offer chances to gain deeper insight into a variety of innovative gear test rigs and laboratory equipment. Further information and registration for the tours will be available at the FZG information desk during the conference.

Download Program PDF

Wednesday, September 18th, 2019

08:30

Registration

Plenary lectures

09:30

Common welcome and opening of the

  • International Conference on Gears 2019
  • International Conference on High Performance Plastic Gears 2019
  • International Conference on Gear Production 2019

by the President of the International Conference on Gears 2019 Prof. Dr.-Ing. Karsten Stahl, FZG, Technische Universität München (TUM), Garching, Germany

09:45

Welcome address by

Matthew E. Croson, President, American Gear Manufacturers Association (AGMA), Alexandria, USA

Dr.-Ing. Arbogast M. Grunau, President of the Managing Board, Research Association for Drive Technology (FVA), Frankfurt a. M.; Principal Expert Bearings, Schaeffler Technologies AG & Co. KG, Herzogenaurach, Germany

10:00

Keynote session:

From system to atom – digital twin on all scales?

Moderation: Prof. Dr.-Ing. Karsten Stahl, FZG, Technische Universität München (TUM), Garching, Germany

Looking into small scale drives driving technology

  • Advantage of digital twins
  • Preconditions for digital twins
  • Digital twins on various scales

Dr.-Ing. Arbogast M. Grunau, President of the Managing Board, Research Association for Drive Technology (FVA), Frankfurt a.M., Germany; Principal Expert Bearings, Schaeffler Technologies AG & Co. KG, Herzogenaurach, Germany

Challenges in modeling multi-scale physics in gear contact problems

  • Explanation of the multi-disciplinary and multi-scale nature of gear contact problems
  • Introduction of models for elastohydrodynamic lubrication, surface wear, and micro-pitting to demonstrate the multi-scale nature of gear contact problems
  • Shortcomings of current models in capturing sub-micron effects in a physics-based manner
  • Identification of research topics towards bridging gaps in multiscale gears

Professor Ahmet Kahraman, Winbigler Professor and Director, Gear and Power Transmission Research Laboratory and Pratt & Whitney Center of Excellence in Gearbox Technology, Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, USA

Atomistic simulations in tribology: potentials, perspectives and limitations

  • Tribological processes hidden at buried interfaces
  • Evolution of materials structure and chemistry under tribological load
  • Lubricants in nanoscale gaps: from tribochemistry to rheology at extreme pressure
  • The great challenge: bridging length and time scales

Dr. Gianpietro Moras, Deputy Group Leader, Multiscale Modelling and Tribosimulation, Prof. Dr. rer. nat. Michael Moseler, Group Leader, Multiscale Modelling and Tribosimulation, Fraunhofer Institute for Mechanics of Materials IWM, Freiburg, Germany

11:45

Time for working lunch – meet & greet at the exhibition area, poster presentation area and GearLab

13:15

Insight into the world of plastic gears

  • Research: Prof. Dr.-Ing Karsten Stahl, FZG, Technische Universität München (TUM), Garching, Germany
  • Manufacturing: Dr.-Ing. Andreas Langheinrich, Horst Scholz GmbH & Co. KG, Kronach, Germany
  • Application: Dipl.-Ing. Robert Seidler, ZF Japan Co., Ltd., Kanagawa, Japan
  • Simulation: Dr.-Ing. Armin Kunz, Robert Bosch GmbH, Abstatt, Germany
  • Software: Dr.-Ing. Ulrich Kissling, KISSsoft AG, Bubikon, Switzerland

Strength evaluation

Moderation: Dr.-Ing. Andreas Langheinrich, Horst Scholz GmbH & Co. KG, Germany

13:45

Comparison of strength rating of plastic gears by VDI 2736 and JIS B 1759 – in vision of building a new international standard

  • Comparison of calculation methods
  • Calculation of bending load capacity of plastic gears
  • Difficulties and obstacles in establishing a global consensus on the calculation method for plastic gears

Inho Bae, Ph.D., Head of Technical Support, Dr.-Ing. Ulrich Kissling, President, KISSsoft AG, Bubikon, Switzerland

14:15

Thermoplastic high performance composite gears

  • Gears made of PEEK and endless carbon fibers
  • Testing plastic gears according to VDI2736 size 2
  • Gear production: composite flow moulding vs. milling

Dr.-Ing. Hans-Jörg Dennig, Senior Lecturer, School of Engineering, Severino Monn, B. Sc., scientific assistant, Centre for Product and Process development, Zurich University of Applied Sciences, Winterthur, Dr.-Ing. Albert Vodermayer, Portfolio Manager Industry, icotec ag, Altstätten, Switzerland

14:45

Determination of fatigue strength of plastic gears taking

environmental influences into consideration

  • Lean testing by usage statistical test planning method
  • Multidimensional strength field for the service life calculation of gears
  • Service life calculation by different calculation methods

Dipl.-Ing. Klemens Humm, Development Engineer, Gear Development for Actuators, Bearings, Shift Elements, Dipl.-Ing. (FH) Marc With, Test Engineer Gears, Virtual Engineering & System Validation, Dr. rer. nat. Andreas Linnemann, Data Science/Analytics, Processes and Validation Strategy, ZF Friedrichshafen AG, Germany

15:15

Coffee break – meet & greet at the exhibition area, poster presentation area and GearLab

Tooth flank load capacity

Moderation: Dipl.-Ing. Robert Seidler, ZF Japan Co., Ltd.

16:00

Flank load carrying capacity of oil-lubricated high performance plastic gears – analysis of the pitting development in back-to-back tests

  • Back-to-back tests with a steel-plastic pairing
  • Analysis of flank load carrying capacity acc. to VDI 2736
  • Evaluation of pitting performance

Christopher Martin Illenberger, M. Sc., Research Assistant, Gear Research Centre (FZG), Institute of Machine Elements, Technische Universität München (TUM), Garching, Germany

16:30

Analysis of film thickness and friction in thermoplastic EHL contacts

  • EHL film thickness measurements in thermoplastic contacts
  • Holistic approach to thermoplastic phenomena by simulation an experiment
  • Evaluation of the applicability of EHL approximation equations

Enzo Maier, M. Sc., Research Assistant, EHL-Tribological-Contact and Efficiency, Gear Research Centre (FZG), Institute of Machine Elements, Technische Universität München (TUM), Garching, Germany

17:00

Design of gear surface models for 3D-printing of plastic gears

  • Design of involute gear geometries with regard to 3D-printing technologies
  • STL and SVG formats as direct interface to rapid manufacturing technologies
  • Investigation on involute gears fabricated using of selective laser sintering

Yannick Krieger, M. Sc., Research Assistant, Samuel Detzel, M. Sc., Research Assistant, Prof. Dr. rer. nat. Dipl.-Ing Tim C. Lueth, Full Professor, Institute of Micro Technology and Medical Device Technology (MIMED), Technische Universität München (TUM), Munich, Germany

17:30

Thermal simulation of anisotropic PEEK-based tribocomposites

  • Simulation of tribological systems
  • Determination of contact temperatures
  • Influence of anisotropy in tribologically optimized polymers

Nicholas Ecke, M. Sc., Research Assistant, Chair of Composite Engineering (CCe), Technische Universität Kaiserslautern, Germany

18:15

Organized bus transfer to the evening reception

Get-together

19:00

Evening reception at the Paulaner am Nockherberg

Dinner speech

Dr.-Ing. E. h. Manfred Wittenstein, Chairman of the Supervisory Board, WITTENSTEIN SE Igersheim, Germany

Thursday, September 19th, 2019

Strength evaluation

Moderation: Dr.-Ing. Ulrich Kissling, KISSsoft AG, Switzerland

08:30

Extension of the application limits for crossed helical gearboxes by new geometries for smaller sliding paths or smaller contact pressures

  • New method for the geometry analysis of crossed helical gears
  • Optimization of Hertzian pressures or sliding paths
  • Optimization of excitation characteristics

Christoph Boehme, M. Sc., Research Assistant, Dr.-Ing. Dietmar Vill, Post-doc/Senior engineer, Prof. Dr.-Ing. Peter Tenberge, Full Professor, Chair of Industrial and Automotive Drivetrains, Ruhr-University Bochum, Germany

09:00

Comparison between VDI 2736 wear calculation and experimentally obtained results

  • Polymer gear wear measurement and theoretical wear factor
  • Wear comparison with pin-on-disc results
  • Wear simulation using loaded tooth contact analysis

Sebastjan Matkovic, M. Sc., Research Assistant, Prof. Dr. Mitjan Kalin, Professor, Head of the Lab, Laboratory for Tribology and Interface Nanotechnology, Faculty of Mechanical Engineering, University of Ljubljana; Dr. Aljaž Pogačnik, CEO, Bauhar s.p., Bled, Slovenia

09:30

Predicting wear for high performance plastic gears

  • Wear measurements on a relevant tribological set-up relevant to plastic gears
  • Prediction of wear by combining numerical and analytical tools
  • Validation on measured wear on plastic gears experimentally accessed on a gear tester

Benjamin van Wissen, M. Sc., Design Engineer/Associate Scientist, Dr. ir. Marc Kanters, Scientist, Polymer mechanics, fatigue, failure, strength, Adnan Hasanovic, M. Sc., System Expert Gears and Actuators, DSM Engineering Plastics B.V., Geleen, The Netherlands

10:00

Coffee break – meet & greet at the exhibition area, poster presentation area and GearLab

10:45

Material data for advanced plastic gear simulation

  • Thermoplastic materials for gears
  • Material data characterization for gear simulation
  • Plastic-plastic spur gear wear simulation

Julien Cathelin, Ph.D., Sr. Scientist, Application technology, SABIC Innovative Plastic B.V., Geleen, The Netherlands

11:15

Bespoke plastic compounds for plastic gears

  • Requirements on thermoplastic materials
  • Overview of suitable plastics and their modifications
  • Proactive material selection and part design

Eric Fautz, M. Sc., Product Specialist, Business Unit Technical Compounds, Business Line Specialities, Albis Plastic GmbH, Hamburg, Germany

11:45

Advances in polyacetal materials for gears

  • Dynamic lifetimes of polyacetals at controlled temperature testing
  • Modeling of gear deformation behavior
  • Formulations to improve processability and performance of polyacetals in gears

Ram Ratnagiri, Ph.D., Engineer, R&D, Transportation & Advanced Polymers, DuPont Specialty Products USA, LLC, Wilmington, USA; Dipl.-Ing. Hans Kuchelka, Technical and Development Specialist, Transportation and Advanced Polymers, DuPont de Nemours (Deutschland) GmbH, Neu-Isenburg, Germany; Makoto Kato, Ph.D., Staff Research Chemist, Transportation and Advanced Polymers, DuPont Kabushiki Kaisha, Utsunomiya, Japan

12:15

Investigation of radiation crosslinking as performance enhancement for thermoplastic spur gears

  • Material modification polymer spur gears
  • External and internal modification of polymer matrix
  • Tribological behavior and possible applications

Dipl.-Ing. Bernhard Gierl, Project Engineer, Tribology, Prof. Dr.-Ing. Dietmar Drummer, University Professor, Institute of Polymer Technology (LKT), University Erlangen-Nuernberg, Erlangen, Germany

12:45

Time for working lunch – meet & greet at the exhibition area, poster presentation area and GearLab

NVH/condition monitoring

Moderation: Dr.-Ing. Armin Kunz, Robert Bosch GmbH, Germany

14:15

Powertrain NVH improvement with high performance polymer gears

  • Market trends and customer needs
  • Polymer gear design concept and benefits
  • Concept validation with durability and NVH testing

Dipl.-Ing. Ralf Weidig, Global Program Manager Gears, Automotive Business Unit, Victrex Europa GmbH, Hofheim; Dr.-Ing. Hans Joachim Weimar, Manager Engineering Services, IAVF Antriebstechnik GmbH, Karlsruhe, Germany

14:45

Improvement of the noise and vibration behavior of an electromechanical brake booster – an integral approach

  • High performance plastic gears in innovative brake systems
  • Optimization strategies to improve noise and vibration
  • Correlation of simulation and test on the component and system levels

Dr.-Ing. Jens Fechler, Director R&D, R&D Actuators, Dipl.-Ing. (FH) Michael Knöpfle, Project Engineer/R&D Components, Volker Merz, B. Eng., NVH Engineer/R&D Actuators, IMS Gear SE & Co. KGaA, Donaueschingen, Germany

15:15

Crack detection of plastic gears using a convolutional neural network pre-learned from images of meshing vibration data with transfer learning

  • Visualisation of grey-scale images from vibration signals using FFT
  • Contruction of a CNN based on VGG16 with transfer learning
  • Detection crack or non-crack situation of plastic POM gears

Bui Huy Kien, Doctoral Course Student, Mechanical Engineering, Kyoto Institute of Technology, Japan

15:45

Coffee Break – meet & greet at the exhibition area, poster presentation area and GearLab

Application

Moderation: Prof. Dr.-Ing Karsten Stahl, FZG, Technische Universität München (TUM), Germany

16:30

Simulation tool-chain for plastic gear design

  • Gear design and material selection
  • Stress/strain calculation and fatigue analysis
  • Tribology simulation

Dipl.-Ing. Martin Uhlig, Development Engineer Gear Design, Engineering Components Actuation, Robert Bosch GmbH, Abstatt; Dr.-Ing. César Pastor, Research Engineer, Contact Dynamics and Tribology, Robert Bosch GmbH, Renningen, Germany

17:00

Layout of profile modifications for symmetric and asymmetric plastic gears

  • Plastic gear design: root and flanks strength, wear optimization
  • Transmission error optimization
  • Contact analysis of symmetric and asymmetric gears

Dr.-Ing. Aljaž Pogačnik, Plastic Gear Consultant, Bauhar s.p., Bled, Slovenia; Dr.-Ing. Ulrich Kissling, President, KISSsoft AG, Bubikon, Switzerland

17:30

Multi-criteria polymer gears design optimization procedure

  • Reliable dimensioning of polymer gears
  • An overview of parameters influencing the target criteria
  • Torque transfer function in the smallest volume

Assoc. Prof. Dr. Jože Tavčar, Laboratory for Engineering Design LECAD, Damijan Zorko, M. Sc., Researcher, Prof. Dr. Jože Duhovnik, Full Professor, Head of LECAD Group, Laboratory, Chair for Design and Transport systems, Faculty of Mechanical Engineering, University of Ljubljana, Slovenia

18:00

Complementary strengths of orbitless and planetary drives

  • Review of the known properties of different drive configurations
  • Discovering noise and vibration characteristics using simulation X
  • Prototypes built to exploit both sets of strengths

Leo Stocco, Ph.D., PEng., Managing Director/CEO, Orbitless Drives Inc., Vancouver, Canada

18:30

End of the conference

18:30

Evening reception at the conference venue

Dinner speech

Prof. Dr. Changle Xiang, Professor, Vice President, Beijing Institute of Technology, Director, National Key Lab of Vehicle Transmission, China

Expected participants

The International Conference on High Performance Plastic Gears is addressed to:

  • Manufacturers and Developers of Plastic Gears
  • Companies that are interested in Technology of Plastic Gears
  • Engineers, Designers of Plastic and Metal Gears
  • Users of Metal Gears who are interested in using Plastic Gears instead
  • Companies that develop Calculation Programs for the mechanical engineering industry

Registration now open!

Be part of the “International Conference on High Performance Plastic Gears”.

You would like to know more about the opportunities, chances and limits of plastic gears application? Then sign up below for participating our International Conference on High Performance Plastic Gears. We look forward to your visit.

Registration

Eventnumber: 02TA409

3rd International Conference on High Performance Plastic Gears 2019

Garching near Munich,

FZG Forschungsstelle für Zahnräder und Getriebebau Technische Universität München*

Boltzmannstr. 15,
85748 Garching
+49 89/289-15807 to website

available

1.590,– € plus 19% VAT

Take advantage of the block of rooms we have reserved for guests at the event location. Please list VDI Wissensforum as a reference when making your hotel booking.

Advisory Board

 Ulrich KisslingDr.-Ing. Ulrich Kissling KISSsoft AG / Bubikon

 Armin KunzDr.-Ing. Armin Kunz Robert Bosch GmbH / Abstatt

 Andreas LangheinrichDr.-Ing. Andreas Langheinrich Horst Scholz GmbH & Co. KG / Kronach

 Robert SeidlerDipl.-Ing. Robert Seidler ZF Japan Co., Ltd. / Kanagawa

 Karsten StahlProf. Dr.-Ing. Karsten Stahl FZG Forschungsstelle für Zahnräder und Getriebebau Technische Universität München / Garching

Eventnumber: 02TA409

3rd International Conference on High Performance Plastic Gears 2019

available

Take advantage of the block of rooms we have reserved for guests at the event location. Please list VDI Wissensforum as a reference when making your hotel booking.

In case of queries, you can reach us here

You can reach us at:

+49(0)2116214-201
+49(0)2116214-154
wissensforum@vdi.de

You can book your room at VDI special rates here.

Presidency

Prof. Dr.-Ing Karsten Stahl, Full Professor, Institute of Machine Elements, Director, Gear Research Centre (FZG), Technische Universität München (TUM), Garching, Germany

Become an exhibitor or sponsor

Request information

Are you missing something?

Do you need more information about this event? Then please feel free to send us a message.

Write a message

Other hotel partners: Book hotel for Conference at HRS